Sanitary Butterfly Valves

Material : Body : SS 304, SS 316 or SS 316L (cast or forged)
Handle : *SS3 04 Solid bar with phenolic knob for 4 position
 * Nylon 6 + reinforce glass fiber handle with SS 304 gripper bar
 *or all SS 304 handle for 12 position
Seat : Silicone, EPDM and Viton is available
Operation : Available for pull handle 4 position and gripper handle 12 position
Range of control systems : Available for air actuators, micro switches, solenoids…etc
Size : Usually 1″ – 4″, any size is demandable
Fitting ends : BS, DIN, SMS, 3A, Weld ends, Male ends and Clamp ends
Working pressure : * -0.9 to 10 Bar for cast body
* -0.9 to 20 Bar for forged body
Working temperature : -10oC up to 150oC
Disk head size : * 9.4 x 9.4mm available for cast & forged body
* 8 x 12mm, 12 x 12mm available for forged body
Safety : 100% 6kgf/cm2 air or 25kgf/cm2 hydraulic and
300k times cycle test

Sanitary Ball Valves

VBM3W

3-PC Ball Valve Weld End, 1000 WOG

Connection End : Weld and Clamp Ends
Material : ASTM A351 – CF8M ( DIN 1.4408 ) stainless Steel
Feature : * For food and general chemical service applications
* Bore sizes same as Tube I.D. for completely self draining
* 240 Grit, highly polished internals keep material flowing
* Teflon encapsulated seats maintain sanitary environment
* Locking device available & adjustable stem packing
* 100% air tested under water at 100psi, open and closed positions
* Blow-out proof stem design
* Hydrostatic test pressure 1/4″~2″ 1,500 PSI, 2-1/2″~4″ 1,200 PSI
Option : Cavity Filled type & Non-Cavity Filled Type
Size : 1/2″ – 4″

Sanitary Check Valves

Connection End : Weld and Clamp Ends
Material : ASTM A351 – CF8M ( DIN 1.4408 ) stainless Steel
Feature : * For food and general chemical service applications
* Bore sizes same as Tube I.D. for completely self draining
* 240 Grit, highly polished internals keep material flowing
* Teflon encapsulated seats maintain sanitary environment
* Locking device available & adjustable stem packing
* 100% air tested under water at 100psi, open and closed positions
* Blow-out proof stem design
* Hydrostatic test pressure 1/4″~2″ 1,500 PSI, 2-1/2″~4″ 1,200 PSI
Option : Cavity Filled type & Non-Cavity Filled Type
Size : 1/2″ – 4″

Sanitary Plug Valves

Material : 304, 316, 316L
Available For : 2-Way & 3-Way Plug Valve Weld End
2-Way & 3-Way Plug Valve Clamp End